Machinery
Use this page as the specification checklist. Fields stay explicitly marked until datasheets are supplied.
Speed, power, machine dimensions and electrical requirements will be added when the official machine datasheet is published. Dimension and thickness ranges align with the published sheath programme.
DUSO-R1
Class 1 · EN 523
Class 1 forming line aligned with EN 523 for cylindrical corrugated steel sheaths. Stated capacity 3,000 m/day.
| Class | 1 |
|---|---|
| Standard alignment | EN 523 |
| Stated capacity | 3,000 m/day |
| Supported duct dimensions | Ø 45/50 – 135/140 mm |
| Supported steel thickness | 0.40 / 0.45 / 0.50 / 0.60 mm |
DUSO-R2
Class 2 · EN 524
Class 2 forming line aligned with EN 524 for cylindrical corrugated steel sheaths. Stated capacity 2,500 m/day.
| Class | 2 |
|---|---|
| Standard alignment | EN 524 |
| Stated capacity | 2,500 m/day |
| Supported duct dimensions | Ø 45/50 – 135/140 mm |
| Supported steel thickness | 0.40 / 0.45 / 0.50 / 0.60 mm |
DUSO-F
Module for producing published flat profiles from the corresponding round diameter. Scope depends on tooling sets supplied.
| Supported duct dimensions | 66/22 – 94/28 |
|---|---|
| Supported steel thickness | 0.40 / 0.45 / 0.50 mm |
DUSO-M
Mobilisation-oriented configuration for producing ducts at the project site. Transport envelope, power and output are defined per project.
| Installation requirements | Proje sahasında kurulum; kapsam teklif aşamasında netleştirilir. |
|---|
